Technology continually progresses and evolves, and engineers are finding digital alternatives for more and more areas of our every day lives. Valve Controllers, also known as Positioners, are no exception.
As Platinum Distributors of the PMV range of products, Flow Control Solutions are able to offer both analog and digital options for your valve positioning needs, depending on your application. But what is a valve controller and how does it work?
A valve positioner is basically a motion control device, mounted onto an actuator, which compare the position of the valve with the input data, thereby operating the valve to the appropriate position.
The main types are Pneumatic, Analog (or Electro-Pneumatic) and Digital (Smart) Positioners. Each work in a different way, but their purpose is to move the control valve to a specified position by responding to the input signal they receive and producing an output power source to the Actuator.
Pneumatic devices, which are typically mounted on the side-yoke or top casing of a pneumatic actuator for linear control or near the end of the shaft for rotary control, operate by using increasing or decreasing the air load pressure exerted on the actuator so that the valve stem/shaft moves in accordance with the set point from the control system.
In the case of Electro-pneumatic positioners, they are they operated by receiving a 4-20 mA analog input signal, which, according to Precision Digital https://www.predig.com/indicatorpage/back-basics-fundamentals-4-20-ma-current-loops is “the prevailing process control signal in many industries.”
This signal generates an electromotive force which in turn, moves a flapper to increase or decrease the air pressure to the valve actuator. It also provides feedback from the valve stem and positioner to indicate whether the air pressure needs adjusting.
In comparison, ‘Smart’ positioners use an analog signal, but that signal is converted into a digital signal by the positioner’s inbuilt microprocessor. It then sends a corresponding pneumatic signal to the pneumatic valve actuator to position the valve.
Digital positioners offer greater control over the valve stem position by increasing the speed and accuracy of the actuator’s response. They also provide diagnostic data on the valve’s positioning, friction levels, output pressure, positioner temperature, valve performance and valve seat/plug wear.
This form of predictive diagnostics present a distinct advantage for process industries, by providing the means to predict the need for essential maintenance before system failures occur and the ability to test valves etc to determine whether a replacement is required.
Providing exact control, performance data, breakdown and downtime reduction, they are an effective way to increase productivity and improve plant safety and efficiency, so you may be wondering why everyone hasn’t already opted to go ‘Smart’ as their way forward?
The answer is, of course, suitability for the application.
In addition to the cost implications that can accompany such sophisticated diagnostics and positioning, you must also consider whether your staff have the right training and your process plant has the right capabilities to use Smart Controllers.
For example, they would not be suitable for situations without a digital control signal or power source and are not recommended in high temperature environments in excess of 212°F. They would also be unsuitable in some hazardous situations.
Our EP5 Electropneumatic and D3 Digital Positioners are available as Intrinsically Safe and Explosion Proof versions, designed for use in hazardous locations. In circumstances where there is a readily available power source, they can also be equipped with optional AS-I communication capabilities.
Combined with Flowserve’s ValveSight package, the D3 provides advanced valve diagnostics, including the functionality for running scheduled or manual partial stroke tests (PST).
So, whether your process requires safe, reliable, traditional positioning or ‘Smart,’ in-depth diagnostics and accurate control, we have the right options for you.
Speak to a member of our team on 0161 3039777 for help or further information.