It will come as no great surprise to many of you that the nature of our business leads us to work with many pharmaceutical, food and drink processing and manufacturing concerns, but we have also had the pleasure of working with great educational organisations like, The University of Manchester.
Founded in 1824, during the Industrial Revolution, the university has nearly a 200-year-old history of finding alternative solutions to engineering challenges. For example, the use of drones to measure environmental pollution and the development of prosthetics to aid individuals with physical disabilities.
The diversity of their student body allows for greater collaboration, resulting in more creative idea generation and problem solving and these scholars gain real life experience, dealing with industrial challenges.
Many of the graduates go on to advanced engineering careers working in the healthcare, mechanical engineering and environmental sectors.
Rob Meli, joint MD at Flow Control Solutions, alongside Flowserve Manufacturer’s, Tom Gillian, were delighted to work with one of the university’s PhD students from the Department of Mechanical, Aerospace and Civil Engineering and visited them on site to see how they could assist with the project he was working on.
The Valve/Actuator assembly being used to carry out experiments in the university’s Hypersonic Wind Tunnel, had been purchased in 1964. The tunnel was, and still is, utilised to test three component sting force balance, dual sting testing and drop testing and can be used to measure force, pressure, velocity and surface temperatures.
In this case, the student was testing compressed air flow drawn over metal shapes, placed in different orientations. A vacuum was created in downstream tanks, which pulled air from 7barg reservoirs across the components once the valve was opened.
The valve needed to be opened as quickly as possible, to take advantage of as much of the air in the reservoir as possible. Each test run lasted approximately 7.5 seconds.
The original 1964 valve took just under 1 second to open fully, which was a significant proportion of time for each experiment. Our aim was to provide the right expertise to reduce the opening time of the valve as much as possible.
Flow Control engineered and supplied the equipment you can see pictured above. It consisted of new 3” F819 and 33RDB40 valves and actuator, with special dump valves drilled into the body, to remove air as quickly as possible.
This provided the result that the University of Manchester required and the PhD Student commented, “Just wanted to let you know that we have installed the firing valve as part of the wind tunnel circuit. We have been performing calibrations this week and the valve is performing excellently. From measurements taking during runs we are achieving repeatable valve opening times of 0.044 seconds.
We were proud to help such an innovative and progressive organisation achieve the end results they were aiming for. If you would like to know how our on-site solutions could work for you, then get in touch and let’s get the conversation started. Tel: 0161 303 9777